Thread trimmer attachment specially studied for Pfaff 343-712/02,
Created to simplify the particular basting works for which the machine
is usually employed, and to reduce its costs.
Equipped with ARGO electronic motor.
-
Low speed (about 300 r.p.m.) for stitch by stitch bastings.
-
High speed (about 950 r.p.m.) that shortens the time required for sewing normal bastings, with a 4/5 cm. long stitch.
· Advantages are: thread saving, shortening of the
manifacturing time, good quality bastings. It must also be remembered
that the pieces to be sewn need to be placed on the machine table
only once. Each time the thread is cutted, the piece of clothing has
just to be moved to the next position.
· To cut the threads the operator simply has backpress slightly the machine footboard, and the thread trimmer will start, leaving the upper thread (needle), the lower thread (bobbin) and the threads on the piece of clothing all of the same length (5cm.). Stop and thread trimming can also be done while the machine is working, like a normal thread trimmer.
· The use of the basting arm-machine, equipped with the component "Rasafilo CG 4000", does not require any particular training for the operator.
